EBA KeDrive D5 The single-axis controller without compromise
Product features
• Profibus slave
• Protocol DPV-1
• High interference immunity
• Electronic parameter chip
Short description
The FM 265/A is a Profibus slave interface module. It belongs to the communication modules of the KeConnect C2 pro
duct line. It enables the exchange of cyclical process data and acyclical parameter data between a KeControl C2 control
and any Profibus slave devices with a transmission rate of up to 12 Mbit/s.
These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus
couplers
Profibus DP interface
Master/slave 1x slave
Data transmission rates 9.6 kbit/s to 12 Mbit/s
Max. line length 100 m (at 12 Mbit/s) to 1200 m (at 9.6 kbit/s)
Galvanic isolation Yes, signal lines
Dimensions, weight
Height 120 mm
Width 22.5 mm front plate / 32.5 mm incl. K-bus plug
Depth 100 mm
Weight 140 g
General
Supply voltage 24 V DC from K-bus, 5 V from K-bus
Protection class III acc. to EN 61131-2
LED displays on the front plate Status and error
Max. operable on a CPU module 1x
Max. power consumption K-bus 24 V 0 W
Max. power consumption K-bus 5 V 1.4 W
Product features
• Sercos III master (FX 271/B)
• High interference immunity
• Electronic parameter chip
Short description
The FX 271/B is a Sercos III master fieldbus option module. The option module is operated directly in a PCI slot of a
CP 24x/x or CP 26x/x of the KeControl C2 product line. In addition, the FX 271/B is equipped with two Ethernet inter
faces.
Sercos III is an Ethernet-based bus that was developed both for drive technology as well as for I/O operation as a digital
interface. This standard enables flexible, fast and precise control and coordination of machine movements. The Ethernet
technology enables continuous communication between a control or service station and the respective slaves
Sercos III interface
Number / data transmission rate 1x 100 Mbit/s
Galvanic isolation Yes, signal lines
Connection Modular plug, 8-pin (RJ45 connector)
Ethernet interface
Number / data transmission rate 2x 100 Mbit/s
Galvanic isolation Yes, signal lines
Connection Modular plug, 8-pin (RJ45 connector)
Mechanical data
Structure Front plate mounted on PCB; no housing
Protection rating IP20 if the module is plugged into the CPU module
Weight 83 g
General
Type of interface PCI
Supply voltage 5 V DC and 3.3 V DC
Protection class III acc. to EN 61131-2
Displays on the front plate Activity LED
Max. operable on a CPU module 1x
Max. power consumption K-bus 5 V 2 W
Max. power consumption K-bus 3.3 V 2.6 W
Module detection YES (no type detection)