KEBA

KEBA KeControl C5 – FE 560 Multi-protocol fieldbus expansion card

Product features

• Profibus slave

• Protocol DPV-1

• High interference immunity

• Electronic parameter chip

Short description

The FM 265/A is a Profibus slave interface module. It belongs to the communication modules of the KeConnect C2 pro

duct line. It enables the exchange of cyclical process data and acyclical parameter data between a KeControl C2 control

and any Profibus slave devices with a transmission rate of up to 12 Mbit/s.

These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus

couplers

Profibus DP interface

Master/slave 1x slave

Data transmission rates 9.6 kbit/s to 12 Mbit/s

Max. line length 100 m (at 12 Mbit/s) to 1200 m (at 9.6 kbit/s)

Galvanic isolation Yes, signal lines

Dimensions, weight

Height 120 mm

Width 22.5 mm front plate / 32.5 mm incl. K-bus plug

Depth 100 mm

Weight 140 g

General

Supply voltage 24 V DC from K-bus, 5 V from K-bus

Protection class III acc. to EN 61131-2

LED displays on the front plate Status and error

Max. operable on a CPU module 1x

Max. power consumption K-bus 24 V 0 W

Max. power consumption K-bus 5 V 1.4 W

Product features

• Sercos III master (FX 271/B)

• High interference immunity

• Electronic parameter chip

Short description

WOODWARD 5501-465
WOODWARD 5501-467
WOODWARD 5501-470
WOODWARD 5501-471
WOODWARD 8200-1302
WOODWARD 8200-1302
WOODWARD 8237-1006
WOODWARD 8237-1600
WOODWARD 8273-140
WOODWARD 8402-319 8402-119
WOODWARD 8440-1666 B
WOODWARD 8440-1706
WOODWARD 8440-1706 A SPM-D11
WOODWARD 8440-2047
WOODWARD 8444-1067

The FX 271/B is a Sercos III master fieldbus option module. The option module is operated directly in a PCI slot of a

CP 24x/x or CP 26x/x of the KeControl C2 product line. In addition, the FX 271/B is equipped with two Ethernet inter

faces.

Sercos III is an Ethernet-based bus that was developed both for drive technology as well as for I/O operation as a digital

interface. This standard enables flexible, fast and precise control and coordination of machine movements. The Ethernet

technology enables continuous communication between a control or service station and the respective slaves

Sercos III interface

Number / data transmission rate 1x 100 Mbit/s

Galvanic isolation Yes, signal lines

Connection Modular plug, 8-pin (RJ45 connector)

Ethernet interface

Number / data transmission rate 2x 100 Mbit/s

Galvanic isolation Yes, signal lines

Connection Modular plug, 8-pin (RJ45 connector)

Mechanical data

Structure Front plate mounted on PCB; no housing

Protection rating IP20 if the module is plugged into the CPU module

Weight 83 g

General

Type of interface PCI

Supply voltage 5 V DC and 3.3 V DC

Protection class III acc. to EN 61131-2

Displays on the front plate Activity LED

Max. operable on a CPU module 1x

Max. power consumption K-bus 5 V 2 W

Max. power consumption K-bus 3.3 V 2.6 W

Module detection YES (no type detection)

Leave a Reply

Your email address will not be published. Required fields are marked *