KEBA

KEBA BL250/B Bus link module

Incremental encoder

inputs

Number of inputs 2

Resolution 32 bit

Galvanic isolation No

Max. encoder frequency 250 kHz (differential)

Evaluation Single, double and quadruple evaluation configurable, counter function with and without direction evaluation

Max. pulse rate 1 MHz when using quadruple evaluation (differential)

Input range Configurable 5 V differential and 24 V

Position counter

Counter width 32 bit

Speed measurement

Measurement process Gate time measurement with internal 50 MHz cycle

Counter width 24 bit

Minimum detectable speed Pulse duration greater than 0.33 s = speed 0

Highest precision

Analogue signals are transmitted to the controller or supplied to the peripherals with the highest accuracy and interference immunity.

A microcontroller converts the measured values of the analog inputs and outputs with the calibration data and passes the standardized values on to the higher-level automation device.

Your benefits at a glance:

Optionally, analog current and voltage signals can be processed

Analog voltage inputs can be operated potentiometrically or differentially

Measuring accuracy due to high resolution and noise immunity

Input and output ranges can be freely defined by the configurability

Fast diagnosis in case of cable or sensor defects due to early break detection for analog voltage inputs

VMIC VMIVME7740 VMIVME-7740-855
VMIC ZT5524A1A
VORTRAN 405NM/0.7MM
VORTRAN KDL-1230
VORTRAN LST200
VWR SCIENTIFIC MODEL 3000
WAGNER+GRIMM AG CH-6102 ETUI1500
WAGO MCS 231-302/037-000
WAGO VDE0611
WARNER ELECTRIC ERS-198 1005-05-001
WATLOW CAS 16CLS/CAS
WATLOW CAS200 CLS216
WATLOW CLS208
WATLOW CLS2163C1-110200000/CLS204204-C10000AA/CLS208208-C10000AE
WATLOW MLS300

KeConnect C5

Analog voltage inputs: AI 570. AI 571

Analog current inputs: AI 575. AI 576

Analog voltage outputs: AO 570. AO 571

Analog current outputs: AO 576

Voltage mixer modules: THE 570. THE 571. THE 572

Current mixing modules: AM 575. AM 577

Switch off quickly and safely

The digital I/Os are optimized for fast detection of digital signals and switching of actuators. They can be operated directly on a controller or remotely via a bus coupler.

The modules are available in various granularities for inputs and outputs. Mixed modules guarantee a price- and space-optimized utilization.

Your benefits at a glance:

Usability of selected digital inputs as interrupt inputs or for period time measuremen

Digital outputs with a nominal load of 2 A for fastest switching cycles of inductive loads due to optimised switch-off behaviour

Galvanic isolation of the 2 A outputs which can be supplied individually

KeConnect C5

Digital inputs: DI 570

Digital outputs: DO 550. DO 570

Mixed modules: DM 570. DM 556 (inverse logic)

Leave a Reply

Your email address will not be published. Required fields are marked *