KEBA CP505/A controller Brand
Digital output modules DO 242/B and DO 272/A enable the connection
of up to 14 digital outputs. The digital outputs switch the 24 V DC
control signals of a central module galvanically isolated from the
connected actuators and are designed for a load of up to 2 A at 50 %
simultaneity.
The modules are equipped with a fast shutdown function that enables
a rapid shutdown of inductive loads, e.g., hydraulic valves.
| RELIANCE | 30V4060 |
| RELIANCE | 45C992 |
| RELIANCE | 57045 |
| RELIANCE | 57401 |
| RELIANCE | 57401-2 |
| RELIANCE | 57412 |
| RELIANCE | 57421 |
| RELIANCE | 57552-4 |
| RELIANCE | 57C330C |
| RELIANCE | 57C332A |
| RELIANCE | 57C404C |
| RELIANCE | 57C410A |
| RELIANCE | 57C430 |
| RELIANCE | 57C443 |
| RELIANCE | 57C652 |
| RELIANCE | 6MDBN-012102 |
Machine processes can thereby be accelerated and productivity increased.
The operational safety is ensured by the permanent short-circuit
protection of the outputs. Should a short circuit occur, it is detected
and reported to the control module.
These modules are attached directly to a CPU module or can be operated
with all KEBA controls by means of bus couplers.
The KeTop T10 is a machine operating device that is intended for jogging
robots in an intuitive way with „DirectMove“. DirectMove is the name for
operating a robot or a machine on the basis of position detection in or
parallel to the pointing direction.
Compared to a conventional KeTop the KeTop T10 is equipped with a
firmware for calculating the orientation of the device and for communication
with the control, since it has a limited graphical interface.
The key benefit of the KeTop T10 is the knowledge about it’s own orientation
in space. This way the KeTop T10 can be used for selecting desired directions
of movements. Similar to show a direction to a human operator using ones
finger.
Although the KeTop T10 is designed for jogging robots, it can be used for
any application, where it is useful to show directions or orientation in space
by using the device itself.
An integrated emergency stop and an enabling control switch make it the
perfect operating device for any machine requiring save manual operation.
The new, intuitive way of operation together with its compact size allows
the operator to concentrate on the operated machine instead of paying
attention to the operating device.
The display of the KeTop T10 is used to display the status and shows the
icons setted by the application on the control. An exception are the error
codes or internal icons (e.g. compass for referencing) which are displayed
directly by the KeTop T10.
KeView Trend is a HMI software program for efficient use and fast
visualization creation with the help of a powerful function library, even
without programming knowledge.
Thanks to freely definable widgets and excellent interaction with KEBA
operating devices, a short time-to-market is ensured.
Freely programmable JAVA extensions open the door to nearly unlimited
applications.
KeView Style is based on the latest Java 8 with JavaFX.
Innovative application concepts can be easily implemented
using ViewEdit, the graphic designer. With the integrated multitouch
gestures and the diverse graphical possibilities, it is very easy to
create modern HMI applications. A machine can thereby be operated
as intuitively as a smartphone. With the RealTime Widgets developed
by KEBA, a machine can be directly operated in real-time. By means
of this innovation, hardware variants can be reduced and the HMI
can be used to create a true user experience.
KeTop T150/155 Mobile IPC HMIs
With the dramatic increase in robotics and safe collaborative automation
systems customers want one HMI that integrates machine, motion,
robotics, and safety.