Eaton PCB 1420570  1520570 Source Electronics Interconnect PCB

Eaton PCB 1420570  1520570 Source Electronics Interconnect PCB

SNMP Specifics for All Supported Contacts

The ConnectUPS generates PowerMIB trap number 30

(xupstdContactActiveNotice) to indicate the change from normal state of

either contact.

The trap text is “The Contact indicated by xupsContactIndex is in its

Active State.” The severity level of this trap is MAJOR.

Table 7. xupstdContactActiveNotice Trap Variables

Variable

Description

Comments

xupsContactIndex

The number of the

supported contact

xupsContactType

normallyOpen(1) or

normallyClosed(2)

Since the monitoring of the contact is assumed to be

enabled if you receive the trap, the Type notUsed(4) would

never be sent. Since Type anyChange(3) is not supported by

the ConnectUPS, it is also not a valid type.

xupsContactState

The current “notice” state of

the contact

Valid states for the trap would be openWithNotice(3) or

closedWithNotice(4). Open(1) and closed(2) are assumed to

be the “normal” (at rest) states of the contacts being

monitored and would not be valid during the sending of this

trap.

xupsContactDescr

The user-friendly External

Contact Name for the

appropriate contact

The default for each contact being monitored is “External

Contact #_ Status” where the `_’ is the number (index) of

the contact.

The ConnectUPS generates PowerMIB trap number 31

(xupstdContactInactiveNotice) to indicate the return to the normal state

of either contact.

The trap text is “The Contact indicated by xupsContactIndex has

changed to its Inactive state.” The severity level of this trap is

INFORMATIONAL.

Table 8. xupstdContactInactiveNotice Trap Variables

Variable

Description

Comments

xupsContactIndex

The number of the

supported contact

xupsContactType

normallyOpen(1) or

normallyClosed(2)

Since the monitoring of the contact is assumed to be

enabled if you receive the trap, the Type notUsed(4) would

never be sent. Since Type anyChange(3) is not supported by

the ConnectUPS, it is also not a valid type.