Eaton OPTC2 SVX/SPX modbus RTU Communication coard
Eaton OPTC2 SVX/SPX modbus RTU Communication coard
SNMP Specifics for All Supported Contacts
The ConnectUPS generates PowerMIB trap number 30
(xupstdContactActiveNotice) to indicate the change from normal state of
either contact.
The trap text is “The Contact indicated by xupsContactIndex is in its
Active State.” The severity level of this trap is MAJOR.
Table 7. xupstdContactActiveNotice Trap Variables
Variable
Description
Comments
xupsContactIndex
The number of the
supported contact
xupsContactType
normallyOpen(1) or
normallyClosed(2)
Since the monitoring of the contact is assumed to be
enabled if you receive the trap, the Type notUsed(4) would
never be sent. Since Type anyChange(3) is not supported by
the ConnectUPS, it is also not a valid type.
xupsContactState
The current “notice” state of
the contact
Valid states for the trap would be openWithNotice(3) or
closedWithNotice(4). Open(1) and closed(2) are assumed to
be the “normal” (at rest) states of the contacts being
monitored and would not be valid during the sending of this
trap.
xupsContactDescr
The user-friendly External
Contact Name for the
appropriate contact
The default for each contact being monitored is “External
Contact #_ Status” where the `_’ is the number (index) of
the contact.
The ConnectUPS generates PowerMIB trap number 31
(xupstdContactInactiveNotice) to indicate the return to the normal state
of either contact.
The trap text is “The Contact indicated by xupsContactIndex has
changed to its Inactive state.” The severity level of this trap is
INFORMATIONAL.
Table 8. xupstdContactInactiveNotice Trap Variables
Variable
Description
Comments
xupsContactIndex
The number of the
supported contact
xupsContactType
normallyOpen(1) or
normallyClosed(2)
Since the monitoring of the contact is assumed to be
enabled if you receive the trap, the Type notUsed(4) would
never be sent. Since Type anyChange(3) is not supported by
the ConnectUPS, it is also not a valid type.
Variable
Description
Comments
xupsContactState
The current “normal” state
of the contact
Valid states for the trap would be open(1) and closed(2)
since these are the normal (at rest) states of the contacts
being monitored. OpenWithNotice(3) or
closedWithNotice(4) are the “notice” states for the
contacts being monitored and would not be valid during the
sending of this trap.
xupsContactDescr
The user-friendly External
Contact Name for the
appropriate contact
The default for each contact being monitored is “External
Contact #_ Status” where the `_’ is the number (index) of
the contact