Keba Sx Tpu 2 16/64 3Hac023195-001/04
Product features
• Thermoelement type J, K, L
(TM 220/A, TM 240/A)
• For PT100 sensors
(TM 225/A)
• Internal and external cold junction compensation
• High measurement precision
• Sensor failure detection
• Electronic parameter chip
Short description
The TM 2xx/A series consists of temperature measurement modules that can be directly attached to CPU modules and
operated with all product lines of the KEBA control system by means of bus couplers.
TM 220/A, TM 240/A
Analog input modules TM 220/A and TM 240/A enable the direct connection of thermoelements (2-conductor tech
nique). The calibration and linearization of the temperature values takes place via a microcontroller. A sensor failure,
should it occur, is reported to the higher-level central module and can be evaluated in the application.
Two operating modes are supported:
• Display of the actually measured temperature (standard mode)
• Display of the measured voltage in μV
Cold junction compensation can occur via internal temperature measurement at the terminals of the module or optionally
with the aid of external sensor TE 220/A (external terminal temperature compensation).
TM 225/A
Analog input module TM 225/A enables the direct connection of PT100 resistor sensors. Up to four temperature sensors
can be operated with 2- or 4-conductor technique. With the 4-conductor technique, the interference associated with the
conductor lengths is compensated for and the precision of the measurement thereby increased
SSI Interfaces
Number 4
Data transmission rate 125 kbit/s, 250 kbit/s, 500 kbit/s, 1 Mbit/s
Galvanic isolation According to suggestion of the SSI standard
Resolution Max. 32 bit (number of bits can be configured)
Supported data code Binary code, Gray code
Output voltage for encoder supply +24 V DC
Max. current for encoder supply 250 mA per channel
Line break monitoring Yes
Short-circuit protection Via self-resetting fuse
Dimensions, weight
Height 120 mm
Width 270 mm
Depth 100 mm
Weight 880 g
Environmental conditions
Operating temperature +5 °C … +55 °C
Storage temperature-40 °C … +70 °C
Relative air humidity 10 % to 95 % (non-condensing)
Vibration resistance Acc. to EN 61131-2:2007
Shock resistance Acc. to EN 61131-2:2007
General
Nominal voltage 24 V DC from front (nominal voltage tolerance: 19.2 V DC to 30 V DC acc. to EN 61131-2)
Max. switch-on current 5 A
Overvoltage category II
Protection class III acc. to EN 61131-2:2007
Max. total power consumption 62.5 W- Own power consumption 9 W- Max. output power K-bus 5 V 8.5 W- Max. output power K-bus 24 V 45 W
Protective measures against Polarity reversal
Supply connection terminals Open terminals, pitch 5.08 mm
Reverse polarity protection Yes
Protection rating IP20