KEBA Kemro K2-200 CP 252/X Industrial controller Part No.068155
KeView Trend is a HMI software program for efficient use
and fast visualization creation with the help of a powerful
function library, even without programming knowledge.
Thanks to freely definable widgets and excellent interaction
with KEBA operating devices, a short time-to-market is ensured.
Freely programmable JAVA extensions open the door to nearly
unlimited applications.
KeView Style is based on the latest Java 8 with JavaFX.
Innovative application concepts can be easily implemented
using ViewEdit, the graphic designer. With the integrated multitouch
gestures and the diverse graphical possibilities, it is very easy to
create modern HMI applications. A machine can thereby be operated
as intuitively as a smartphone. With the RealTime Widgets developed
by KEBA, a machine can be directly operated in real-time. By means
of this innovation, hardware variants can be reduced and the HMI
can be used to create a true user experience.
KeTop T150/155 Mobile IPC HMIs
With the dramatic increase in robotics and safe collaborative
automation systems customers want one HMI that integrates
machine, motion, robotics, and safety.
Dimensioning of the power supply line:

When dimensioning the power supply line also observe the possible reduction
factors and the increased en vironmental temperatures in the interior connection
area of the charging station (see temperature rating of the supply terminals).
Under certain circumstances, this can lead to an increase of the cable cross-section
and to the adaptation of the temperature resistance of the power supply line.
Wireless Mobile IPC HMI with integrated safety
Combine your HMIs – PLC, Robot, and ERP system along with safety into one device
for simple and mobile operator control that increases productivity and safety.
The BL 250/B is a bus coupler of the Kemro-control system
It is used to op-erate modules of the system as decentralized I/O
clusters at other controls.The BL 250/B is connected with a
Host-control or another bus link modulevia K-Net. A maximum of
12 modules can be supplied and operated.
Behavior in case of an error at the BL BL 250/B
If an error occurs during start-up of the BL 250/B, the status LED
will remainon red and/or orange. In this case no K-Net bus traffic
will be possible, themodule must be exchanged.
Error states in the ongoing operation of the BL 250/B are monitored
bywatchdog. If the watchdog is triggered, it will activate a reset on
the BL 250/B and all inputs and outputs of the connected modules
will be reset to theirinitial status. The status LED of the BL 250/B
indicates red, the status LEDsof the other K-Net participants will
indicate green.
Response to module errors
A module error of one of the connected modules (e.g. HW-defect) is
de-tected by the BL 250/B and a corresponding status message is sent
to thebus master. The error is indicated on the status LED (red)
Behavior at sensor failure on a connected module
A sensor failure on an analog input of a connected module is forwarded
asstatus message to the K-Net master. The status LED of the BL
250/Bre-mains on green.