Eaton SPN6204XEAXX2F Magnum low voltage power circuit breaker
The Eaton®
ConnectUPS Web/SNMP Card is a network device for your
uninterruptible power system (UPS) that provides both SNMP and HTTP
compatibility.
The ConnectUPS Web/SNMP Card is available in three models:
ConnectUPS-X – a card for UPSs with an X-Slot
ConnectUPS-BD – a card for UPSs with a BestDock slot
ConnectUPS-E – an external adapter for Eaton 9305 and 9150 UPSs
All models can connect to a twisted-pair Ethernet network
(10/100BaseT) using an RJ-45 connector.
The ConnectUPS-X has a built-in switching hub that allows three
additional network devices to be connected to the network without the
requirement of additional network drops.
With the ConnectUPS Web/SNMP Card, you can monitor the UPS
several different ways:
using a Web browser such as Microsoft® Internet Explorer to monitor
and manage the connected UPS
using your Internet-ready cell phone or PDA (personal digital
assistant)
using SNMP-compatible network management software
(user-supplied) to monitor the UPS in a method similar to that of other
network devices
Client software is available for Microsoft Windows®, Mac OS® X, Novell®
. These programs communicate through
, and UNIX®
TCP/IP with the ConnectUPS Card and automatically shut down the
protected system during extended power outages.
In addition, the ConnectUPS Card has the following features:
Hot-swappable, simplifying installation by allowing you to install the
card safely without powering down the critical UPS load.
Configuration from serial port, Telnet, SSH, HTTP Web browser,
Bootp, or DHCP.
Management from HTTP Web browser, Internet-ready cell phone or
PDA, or SNMP management software.
E-mail notification of changes in the UPS status through SMTP
(simple mail transport protocol) via e-mail client software, a PCS
(personal communication services) phone, or alphanumeric pager.
Support for Eaton (XUPS.MIB) and RFC-1628 Standard UPS
(STDUPSV1.MIB) management information bases.
Firmware upgradable through a Microsoft Windows utility using a
network connection.
Scheduling function to control UPS shutdowns and startups.
History log files (data and events) for recording power problems.
UPS status information available to registered NetWatch clients for
automatic shutdown of Microsoft Windows, Mac OS X, Novell
NetWare, Linux, and UNIX.
With a special Status@aGlance page, a color-coded background on
your Web browser providing quick visibility of the UPS status.
Monitoring of multiple ConnectUPS Web/SNMP Cards by using free
MultiView software.
Monitoring of two normally-open or normally-closed contact devices
through a connection to the configuration port (see page 35).
Compatible with the Environmental Monitoring Probe (EMP)
Ever Electronics SDMWD170 VB231D
SICK CDB650-204 1064114
Merlin Gerin Power Logic PM820MG
JETTER LCD11 788-1-0068 Control Panel / Jetter Processor Display Panel
Relay M-BUS MR006DL RS232C
Reliance Electric 804.89.01E GD.719.48.00-C
TELEMECHANICAL SOFT STARTER ATS48D22Q
CFS WEERT 11014652 PLATE
Omron GRT1-AD2 Analog Input Unit
BECKHOFF CX1000-0121 N003 – N005 – N001 – N0000 – COOL with SSD-C02GI-3500
Lenze DSVARS 071-22 1.7kW DSVARS07122
AALBORG GFM373 Mass Flow Meter Gfm
Siemens 6SL3210-1KE12-3AP2 SINAMIC G120CDP 0.75kw
Pilz Pnoz Xm14s1O 774600
AALBORG GFM373 Mass Flowmeter Gfm
B&R X67DO1332 Rev.L0
Lenze DSVARS 071-22 1.7 kW DSVARS07122
B&R 7EX477.50-1 Rev.C0
Siemens 6SL3210-5HB10-4UF0
ABB ALFA LAVAL 200-PSSG
Beckhoff AX2003 S60300-520 With Lightbus B200
KBS Pomp Drive 5003K00B00SI4 3kW
TELEMECANIQUE SOFT STARTER ATS48D22Q
EATON ES4P-221-DMXD1 EASY SAFETY ES4P221DMXD1
Allen-Bradley 22A-D6P0N104 2.2kW