KEBA XW599-020 2 m Mini I/O cables
Digital outputs
DM 272/A DM 276/A
Number / wiring of outputs 8x source 8x sink
Nominal voltage 24 V DC
Processing time 1 ms
Nominal current of digital outputs 2 A at 50 % simultaneity
Protection facility Short-circuit protection
Max. inductive load 1 J at max 0.2 Hz
Status display Orange LED
Galvanic isolation Yes, from the control electronics and between one another,
electric strength 707 V with isolated ground connection
Dimensions, weight
Height 120 mm
Width 22.5 mm front plate / 32.5 mm incl. K-bus plug
Depth 100 mm
Weight 135 g
General
Supply voltage 24 V DC from front
(nominal voltage tolerance: 19.2 V to 30 V, acc. to EN 61131-2)
24 V DC from K-bus, 5 V DC from K-bus
Overvoltage category II
Protection class III acc. to EN 61131-2
Addressing on K-bus Via 16-digit address switch, on the side
Type of terminals Open – pitch 5.08 mm
Max. power consumption K-bus 24 V 1.9 W
KeTop T70 Mobile IPC HMIs
With the dramatic increase in robotics and safe collaborative
automation systems customers want one HMI that integrates
machine, motion, robotics, and safety.
// Simplifies and increases safety of the operator‘s control
of the complete automation cell
// Runs Windows 10 or HTML5 HMI software, Linux
optional
// Rugged IP65 rating, drop and vibration tested, globally trus
ted HMI in the robotics industry
// Analog resistive touch screen
// Fast response membrane keypad with communication
to PLC or Robot for accurate control
// E-Stop and integrated safety enable provides safe
operation with robots, machine motion, and safety
monitored areas
Dimensioning of the power supply line:
When dimensioning the power supply line also observe the possible reduction factors and the increased en
vironmental temperatures in the interior connection area of the charging station (see temperature rating of
the supply terminals). Under certain circumstances, this can lead to an increase of the cable cross-section
and to the adaptation of the temperature resistance of the power supply line.
Wireless Mobile IPC HMI with integrated safety
Combine your HMIs – PLC, Robot, and ERP system along with safety into one device for simple and mobile operator control that
increases productivity and safety.