KEBA

KEBA OP341/Y-1400 | Operator Panel

Analog input module KeConnect AI 240/A features four analog voltage inputs that process differential or ratiometric input

signals in the range from ±10 V or 0-10 V with a resolution of 14 bit.

A sensor failure, should it occur, is reported to the higher-level central module and can be evaluated in the application.

This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a bus coupler.

Two variants of the BL27x series are available:- With four additional

digital inputs (BL 27x/A)- With four additional digital outputs (BL 27x/B)

The BL 210/B (CANopen) and the BL 27x/x series are bus coupler modules that,

in combination with I/O modules,

enable the decentralization and transmission from module islands.

Digital inputs (only BL 27x/A)

Number / type of inputs 4x type 1 (acc. to EN 61131-2)

Voltage range for “1” 15 V ≤ UH ≤ 30 V

Voltage range for “0”-3 V ≤ UL ≤ 5 V

Status display Green LED

Cycle time 1 ms

Usable as interrupt inputs Yes

Response time of the K-bus interrupt 100 μs with 5 kHz input filter

Galvanic isolation No

Debouncing Configurable 1 ms, 100 ms

Digital outputs (only BL 27x/B)

Number of outputs 4

Nominal voltage 24 V DC

Processing time 1 ms

Nominal current of digital outputs 0.5 A at 100  % simultaneity per group

Galvanic isolation No

WOODWARD 505XT 8200-1312
WOODWARD 5233-2089
WOODWARD 5437-1067A
WOODWARD 5453-203
WOODWARD 5453-277
WOODWARD 5453-279
WOODWARD 5464-414
WOODWARD 5466-253
WOODWARD 5466-257
WOODWARD 5466-258
WOODWARD 5466-316
WOODWARD 5466-318
WOODWARD 5466-409
WOODWARD 5466-425
WOODWARD 5501-365

Leave a Reply

Your email address will not be published. Required fields are marked *