KEBA CU313 Large-Scale Complex Control Module
Analog input module KeConnect AI 240/A features four analog voltage inputs that process differential or ratiometric input
signals in the range from ±10 V or 0-10 V with a resolution of 14 bit.
A sensor failure, should it occur, is reported to the higher-level central module and can be evaluated in the application.
This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a bus coupler.
Two variants of the BL27x series are available:- With four additional
digital inputs (BL 27x/A)- With four additional digital outputs (BL 27x/B)
The BL 210/B (CANopen) and the BL 27x/x series are bus coupler modules that,
in combination with I/O modules,
enable the decentralization and transmission from module islands.
Digital inputs (only BL 27x/A)
Number / type of inputs 4x type 1 (acc. to EN 61131-2)
Voltage range for “1” 15 V ≤ UH ≤ 30 V
Voltage range for “0”-3 V ≤ UL ≤ 5 V
Status display Green LED
Cycle time 1 ms
Usable as interrupt inputs Yes
Response time of the K-bus interrupt 100 μs with 5 kHz input filter
Galvanic isolation No
Debouncing Configurable 1 ms, 100 ms
Digital outputs (only BL 27x/B)
Number of outputs 4
Nominal voltage 24 V DC
Processing time 1 ms
Nominal current of digital outputs 0.5 A at 100 % simultaneity per group
Galvanic isolation No