FOXBORO FBM233P0926GX – Foxboro Fieldbus Module
The manufacturer shall provide two-wire, 1 to 5 V dc output, absolute, gauge, or d/p Cell Transmitters (with
or without pressure seals) suitable for field mounting, that meet the following specifications:
Span Limits:
Accuracy:
LCD Indicator:
Damping:
Electronics Housing:
Modular Electronics:
RFI Protection:
Process Cover Materials:
Sensor Materials:
Process Connection:
Approvals and
Certifications:
Approximate Mass:
Model Codes:
| PIONEER MAGNETICS | PM3398BP-6-1-3-E |
| POLYSPED | PRD2-200 |
| P-OPEN | P-OPEN-P4-150/PAC-OP150/P4 |
| POSITRONIC | PCIH38F300A1 |
| POTTER & BRUMFIELD | SDAS-01-7Y2S1024 |
| POTTER&BRUMFIELD | SDAS-01-7Y2S1024 |
| POWEC | PMP10.48 SIC |
| POWERBOX | PU200-31C |
| POWEREX | PD411811 |
| POWER-ONE | MAP55-1024 |
| PQV | VICONSYS OY |
| PR0S0FT | 1454-9F |
| PR0S0FT | MVI56-MDA4 |
| PRO | SC203-100A-002IR-010-01K-05 |
| Pro Curve | hp procurve Switch2514 |
| PROCESSOR | 958481320100 350211080090 |
| PROCESSOR | 958481320201 350211080460 |
| PROCESSOR | 958481321200 350211080320 |
| PROCESSOR | 958481321210 350211080320 |
Differential Pressure Transmitter (IDP10):
0.5 inH2O to 3000 psi, using five sensors
Bracket Mounted Absolute/Gauge Pressure Transmitters (IAP20/IGP20):
0.5 inH2O to 5000 psi, using six sensors
Direct Connected Gauge Pressure Transmitters (IGP10):
1 to 6000 psi, using four sensors
Direct Connected Absolute Pressure Transmitters (IAP10):
1 to 3000 psi, using three sensors
±0.10% of calibrated span for linear output.
Standard Liquid Crystal Display (LCD) Indicator with pushbuttons for on-board
calibration and configuration.
Settable for a range of none to 8 seconds.
Epoxy coated aluminum or 316 ss, IEC IP66 (NEMA 4X), two-compartment housing
with field wiring in one compartment and electronics in the other compartment.
Easily replaceable, modular electronics.
Maximum error shall be no more than an additional ±0.1% of calibrated span for 30
V/m field intensity between 27 and 1000 MHz.
Industry Standard 316 ss, Carbon Steel, Monel, or Nickel alloy, depending on
transmitter structure selected.
316L ss, Cobalt-Nickel-Chrome (Co-Ni-Cr), Monel, Nickel alloy, Tantalum, or 316L ss
Gold-Plated sensors, depending on transmitter structure selected.
IAP10/IGP10 Transmitters: Direct to process piping or pressure seal
with 1/2 NPT; optional Rc 1/2 or G 1/2 B external threads to process piping. Internal
1/4 NPT thread also provided as plumbing connection to the process; or prepared
for a direct connect seal, or remote capillary connected seal.
IAP20/IGP20/IDP10 Transmitters: Used with process connectors to accept
1/4 NPT, 1/2 NPT, Rc 1/4. Rc 1/2. Schedule 80 welding neck; or PVDF insert(s)
(tapped for 1/2 NPT) in process cover(s) is(are) used as process connection.
Process connection can also be prepared to accept a direct connect seal; or
prepared for a single remote capillary connected seal, or two remote capillary
connected seals. IDP10 available with traditional structure or low profile structures
(low profile structures not available with seals).
Must be suitable for Division 1 Hazardous Locations, and conform to all applicable
European Union Directives. Versions available to meet Agency flameproof and zone
requirements.
1.5 kg (3.3 lb) for Direct-connected AP and GP Transmitters
3.5 kg (7.8 lb) for Bracket Mounted AP and GP Transmitters
4.2 kg (9.2 lb) for DP Transmitters w/ Process Connectors
See inside pages for IDP10 traditional and low profile structures.
With 316 ss Housing: Add 1.1 kg (2.4 lb)
With Pressure Seals: See PSS 2A-1Z11 A
I/A Series IAP10/IGP10 Direct-connected Absolute/Gauge Pressure Transmitters;
IAP20/IGP20 Bracket Mounted Absolute/Gauge Pressure Transmitters, or IDP10 d/p
Cell Transmitters; with 1 to 5 V dc Low Power, Voltage output, with or without pressure
seals; or equivalent