Triconex 4000094-346 TMR Safety Control Module

Determining Field Termination Options by Module Type

This section identifies external field termination products you can use with each type of module.

Topics include:

• Digital Input Modules on page14

• Pulse Input Modules on page15

• Pulse Totalizer Input Modules on page16

• Digital Output Modules on page16

• Supervised Digital Output Modules on page17

• Supervised/Non-Supervised Digital Output Modules on page17

• Dual Digital Output Modules on page18

• Relay Output Modules on page18

• Analog Input Modules on page19

• Thermocouple Input Modules on page21

• Analog Output Modules on page22

• HART Interface Modules on page23

Digital Input Modules

This table identifies termination products you can use with 32-point digital input modules.

Note You need two termination panels (or cables) for each 32-point or 64-point DI module.

Also, you can mix any combination of two termination products listed in a particular

module’s column. For example, for a 115 VAC/VDC module you may use two 9561-810

Table 2 Termination Products for 32-Point Digital Input Modules

Termination Option 115 V AC/DC

(3501E/T)

48 V AC/DC

(3502E)

24 V AC/DC

(3503E)

24 VDC

(3505E)

Standard termination

panel, commoned

9561-810 9562-810 9563-810

9563-910

9563-810

9563-910

Standard termination

panel, non-commoned

9561-110 n/a n/a n/a

Basic termination panel 9551-110 9552-610 9553-610 9553-610

Nonincendive

termination panel

n/a n/a 9572-610 9572-610

Bypass panel n/a n/a BP9228-010 BP9228-010

Fanned-out cable 9101-010 9101-010 9101-010 9101-010

Relay cable 9141-010 9142-010 9143-010 9143-010