Phoenix Contact PSR-MC92-2NO-1NC-24DC-SC – Safety relays 1735099
The contact extension PSR-MC80 is particularly suitable for use in
combination with electro-sensitive protective equipment with monitored
active switching output (OSSD) in accordance with EN 61496.
The PSR-MC80 extends the enabling current paths of a basic device by
three additional enabling current paths, while having an extremely
compact overall width of just 17.5 mm.
The contact extension PSR-MC80 is particularly suitable for use in
combination with electro-sensitive protective equipment with monitored
active switching output (OSSD) in accordance with EN 61496.
The PSR-MC80 extends the enabling current paths of a basic device by
three additional enabling current paths, while having an extremely
compact overall width of just 17.5 mm.PCB connector, nominal cross
section: 1.5 mm2. color: green, nominal current: 10 A, rated voltage
(III/2): 400 V, contact surface: Sn, contact connection type: Socket,
number of rows: 1. number of positions: 6.
product range: PTS 1.5/..-PH CLIP-B, pitch: 5 mm, connection method:
Push-in spring connection, mounting: Snap-on assembly, conductor/PCB
connection direction: 0°, plug-in system: COMBICON PST 1.3.
locking: without, mounting method: Latching flange, type of packaging:
packed in cardboard.
The Axioline E device is designed for use within an EtherCAT® network.
It is used to acquire and output digital signals. The device is suitable for
use without a control cabinet in harsh industrial ambient conditions.
EtherCAT® is a registered trademark and patented technology, licensed
by Beckhoff Automation GmbH, Germany.The QUINT DC-DC converter
24 V/10 A converts the DC voltage from 18 V … 32 V to an adjustable,
controlled and galvanically separated 24 V output voltage.
If no regulated and stable 24 V DC voltage is available to supply a load,
DC-DC converters ensure the adjustment of the 24 V load: A non-regulated
DC voltage is converted to an adjustable output voltage of 22.5 V …28.5 V.
Due to electrical isolation, the DC voltage circuits are electrically isolated
from each other in a safe way. With a design width of only 80 mm, the
housing is extremely slim. The floating DC-OK output and an LED are
available for signaling.
The 6.2 mm wide MINI MCR-SL-RPS-I-I… repeater power supply supplies
transmitters in the field and electrically isolates the input signal from the
output signal. The module can be used in both isolator and repeater power
supply operation.
Electrically isolated 0…20 mA or 4…20 mA analog standard signals are
available on the input and output side.
The power supply (19.2 V DC to 30 V DC) can be supplied via connection
terminal blocks on the modules or in conjunction with the DIN rail connector.
Areva P122 A00F112CAA 31089147 Over Current Relay Alstom
EPRO MMS 6350D Turbine Overspeed Monitoring Alstom Alspa
Pfiffner Current Transformer Part Number HIER464920P000 2
ABB SACE T6N 800 3 Phase 480V 600A Circuit Breaker