Eaton 9465-ET-M-SC IS Media Converter Multimode
ATEX & IECEx CERTIFICATION INFORMATION
The following information is in accordance with the Essential Health and Safety Requirements (Annex
II) of the EU Directive 2014/34/EU [the ATEX Directive – safety of apparatus] and is provided for
those locations where the ATEX Directive is applicable.
General
a. This equipment must only be installed, operated and maintained by competent personnel. Such
personnel shall have undergone training, which included instruction on the various types of
protection and installation practices, the relevant rules and regulations, and on the general
principles of area classification. Appropriate refresher training shall be given on a regular
basis. [See clause 4.2 of EN 60079-17].
b. This equipment has been designed to provide protection against all the relevant additional
hazards referred to in Annex II of the directive, such as those in clause 1.2.7.
c. This equipment has been designed to meet the requirements of intrinsically safe electrical
apparatus in accordance with EN 60079-0. EN 60079-11 and EN 60079-26.
Installation
a. reference to the IEC code of practice IEC 60079-14. In addition, particular industries or end
users may have specific requirements relating to the safety of their installations and these
requirements should also be met. For the majority of installations the Directive 1999/92/EC
[the ATEX Directive – safety of installations] is also applicable.
b. Unless already protected by design, this equipment must be protected by a suitable enclosure
against:
i) mechanical and thermal stresses in excess of those noted in the certification documentation
and the product specification.
ii) aggressive substances, excessive dust, moisture and other contaminants.
c. This equipment is intrinsically safe electrical apparatus and is normally mounted in a hazardous
area. When mounted in a Zone1 location the apparatus must be provided with an enclosure,
which offers an additional degree of protection appropriate to the area classification.
Read also the Special Conditions for Safe Use for any additional or more specific information.
Special Conditions for Safe Use
1. When used with Group I gases, the Modules shall each be mounted within an enclosure
providing a degree of protection of at least IP54. in accordance with EN 60529. and in a
manner that does not impair the existing creepage and clearance distances. The enclosure
shall also comply with the requirements of Clauses 7 and 8 of EN 60079-0:2006.
2. The connectors do not meet the ingress protection rating of IP20. therefore, this shall be
taken into consideration during the installation of the 9400 Series Ethernet Modules when
used with Group II gases, and each module shall be provided with an enclosure that is
commensurate with the environment into which it is installed.
3. The supply to the modules must be derived from a suitably certified, intrinsically safe
supply.
MITSUBISHI FX3U-64MR/ES
ALLEN-BRADLEY 1756-PB75 SER B
SKIRT PCD7.D790
PHOENIX CONTACT 2701815 AXL F BK PN 2701815
SICK CLV410-1010
EWON FLEXY20100_00MA/S white FLX3101
SCHNEIDER ELECTRIC XPSAK361144P
SIEMENS 6AV6 642-0BA01-1AXA1
OMRON CQM1H-CPU51
LEINE&LINDE INCREMENTAL ENCODER 562107251
MITSUBISHI FX2N-80MR-ES/UL
MITSUBISHI FX3U-48MT/DSS
SIEMENS 3RK1301-0JB00-1AA2
Schneider Electric | Telemecanique 140CPU31110!! X1 PIECE!!
Fanuc A20B-2100-0250 / 06C Control Board
OMRON CP1H-X40DT1-D Programmable Controller
HEIDENHAIN VRZ143A
Yaskawa CIMR-G5C40P4
SCHNEIDER ELECTRIC XPSMCMMX0802 8 Input 2 output Expansion screw term
XBTP021010 TELEMECHANICAL Modicon XBTP021010 V:2.1
Omron CJ2M-CPU32
Siemens Sinamics 6SL3040-0JA00-0AA0
Beckhoff CX9001-0101 PLC CPU
Siemens 6SE6420-2UD21-5AA0 Micromaster 420 1.5kW With EMC FILTER
ABB AX400 AX410/ 10002 Transmitter Analyser
Kollmorgen Servo Starcd PRD-MZ40ASIz-62 CR06561-MZ
B&R X67DI1371.L08 Rev.F0
XBTP021010 TELEMECANIQUE Modicon XBTP021010 V:2.1
SCHNEIDER ATV212HD11N4
SEW EURODRIVE MDX61B0030-5A3-40T PLUS MODULE DER11B DFP21B
SEW Eurodrive 8154198.51 / 8236186.11 DFP 21A PROFIBUS DP module
Lenze E84AVSCE2512SX0
Telemechanics TSXT3170 Terminal T317 Connects T317 Terminal Line Only
ANILAM WIZARD 100 CNC CONTROL PANEL
Pro-Face FN-XY16SK41 3080039-02
MITSUBISHI ENGINE OPERATOR CONTROL CIRCUIT NF400-SEW 400AMPS