EATON FP4201-00 / 66D2120G41 Feeder Protection

EATON FP4201-00 / 66D2120G41 Feeder Protection

Clients are available for the following operating systems:

Microsoft Windows

Novell NetWare

Linux

UNIX

Mac OS X

Each NetWatch client uses its IP address to register with a specified

ConnectUPS Web/SNMP Card via the network. Once a client has

registered, any change in UPS status is communicated to NetWatch.

Depending on the operating system, NetWatch typically alerts the

user(s) whenever the UPS begins supplying AC power from its batteries

(for example, the AC line fails). Then, if AC line power does not return

and the remaining battery time is low, NetWatch takes over and

completes an operating system shutdown prior to the UPS running out

of battery power.

MITSUBISHI FX2N-80MR-ES/UL

MITSUBISHI FX3U-48MT/DSS

SIEMENS 3RK1301-0JB00-1AA2

Schneider Electric | Telemecanique 140CPU31110

Fanuc A20B-2100-0250 / 06C Control Board

OMRON CP1H-X40DT1-D Programmable Controller

HEIDENHAIN VRZ143A

Yaskawa CIMR-G5C40P4

SCHNEIDER ELECTRIC XPSMCMMX0802 8 Input 2 output Expansion screw term

XBTP021010 TELEMECHANICAL Modicon XBTP021010 V:2.1

Omron CJ2M-CPU32

Siemens Sinamics 6SL3040-0JA00-0AA0

Beckhoff CX9001-0101 PLC CPU

Siemens 6SE6420-2UD21-5AA0

ABB AX400 AX410/ 10002 Transmitter Analyser

Kollmorgen Servo Starcd PRD-MZ40ASIz-62 CR06561-MZ

B&R X67DI1371.L08 Rev.F0

XBTP021010 TELEMECANIQUE Modicon XBTP021010 V:2.1

SCHNEIDER ATV212HD11N4

SEW EURODRIVE MDX61B0030-5A3-40T PLUS MODULE DER11B DFP21B

SEW Eurodrive 8154198.51 / 8236186.11 DFP 21A PROFIBUS DP module

Lenze E84AVSCE2512SX0

Telemechanics TSXT3170 Terminal T317 Connects T317 Terminal Line Only

ANILAM WIZARD 100 CNC CONTROL PANEL

Pro-Face FN-XY16SK41 3080039-02

Settings found in the UPS Event Actions and UPS Shutdown page and

the Restart Settings page are related to the automatic shutdown of the

UPS-protected computer system using NetWatch. By default, the

ConnectUPS Web/SNMP Card initiates an automatic operating system

shutdown only during a low battery condition. The ConnectUPS

Web/SNMP Card (firmware v2.03 and higher) no longer instructs the

UPS to power off after the operating system shutdown

Appendix

The appendix contains:

The card panel details (connections and LEDs)

Technical card specifications

DIP switch and jumper settings

Serial Pass-Through mode

Upgrading the firmware

External contact monitoring feature

Configuration menu settings

Secure Sockets Layer (SSL) certificate installation

Secure Shell (SSH) Installation

Service and support

Warranty