MOOG D138-006-001 operation panel

The G123-814 emits emissions well below the levels required for CE marking testing.

However, the cable connecting the valve coil should be shielded to ensure that no interfering radiation is emitted.

Connect both ends of the shielded cable to chassis earth. Use terminals 10 and 14 on G123-814.

Immunity to external interference radiation depends on careful wiring techniques.

The recognised method is to use shielded cables for all connections, the

The accepted method is to use shielded cable for all connections and to radially

terminate the cable shield with a suitable grounded cable gland where it enters the industrial steel enclosure.

If this is not possible, chassis ground screw terminals are available on the G123-814.

The length of bare wire should be minimised. Connect the shield at each end of the cable to chassis ground.

This compact brushless Servo Motor is designed to meet the special requirements

of main battle tanks with 2-in-1 stator (double motor) arrangement to accommodate the high power needed.

The brushless servo motor is intended to be integrated into a traverse actuator with a gearbox,

brake and manual input/ auxiliary drive assembly.