IBA ibaM-FO-2IO Interface module
ibaM-COM
Communication module for the ibaMAQS modular system
Data acquisition with ibaPDA
Data transfer over Ethernet / ibaNet-E
| 1C31166G02 LD instruction processor |
| 1C31181G01 16-point remote I/O module |
| 5X00059G01 Robust Analog Input Module |
| 5X00605G01 Servo drive module |
| 5X00106G02 HART high performance analog input module |
| 1C31194G01 thyristor module |
| 5X00481G01OCR 1100 Processor Module |
| PDP22-FBP PROFIBUS DP-V0/V1 FieldBusPlug 1 m |
| 3500/93 135785-02C key component |
| CC-TUIO41 Universal IO-2 redundant coated |
| FC-PUIO01 high-performance input module |
| CC-PUIO31 data processing and control module |
| 5X00481G04 digital output module |
| 1C31113G01 device or module |
| 5X00875G01 high-performance CPU controller module |
| 5X00226G02 high-performance input/output module |
| 5X00226G04 high-performance controller module |
| 5X00070G01 industrial automation control |
| 5X00070G04 control board module |
| 5X00594G01 versatile input/output module |
| 5X00419G02 internal communication socket or related device |
| KJ2201X1-BA1 12P3162X092 SLS1508 logic solver |
| 330105-02-12-05-02-05 3300 XL 8 mm Reverse Mount Probe |
| VMIACC-5595-208 high-performance real-time HUB (hub) |
Wide range of modules
The I/O modules of the system will cover all important signal types in the final state, such as analog and digital inputs and outputs, counter inputs and vibration signals.
Special modules for acquiring measurements from current and voltage transformers are available for medium and high-voltage technology applications.
The number of measuring channels per module is deliberately kept small to ensure optimum scalability.
Data exchange in all directions
In addition to the hardware modules, ibaMAQS offers a wide range of Ethernet-based communication protocols for use with the ibaM-DAQ processor module.
Thanks to the integrated ibaPDA software, both ibaNet and standard Ethernet interfaces are available.
Using a variety of different protocols, the latter enable data exchange with most PLC and automation systems as well as with a number of databases, cloud providers and message brokers.
ibaM-DAQ can both send and receive data. Standard protocols such as OPC DA, OPC UA, SNMP, TCP, UDP, MQTT and other cloud interfaces cover virtually all requirements.
Special protocols, such as IEC 61850 for intelligent protection devices in power engineering, enable data acquisition in industry- specific systems.
Manufacturer- specific protocols are also available for communication with selected measurement systems, e.g., temperature scanners, 3D scanners, etc.
High-precision acquisition
With a resolution of 24 bits for A/D conversion, the I/O modules are also equipped for very demanding measurement tasks.
In addition, the modules offer calibrated A/D converters and galvanically isolated channels. All channels are sampled in parallel and synchronously; the sampling rate can be freely set up to 500 kS/s for some modules.
Smart mechanics
ibaMAQS combines high functionality with an innovative mechanical concept in an extremely compact design. During development, the focus was on ensuring easy handling and quick mounting or replacement of the modules.
The modules are simply plugged onto a DIN-rail and are immediately mechanically and electronically connected thanks to the innovative module connection technology.
The integrated lever can be used to release the connection again and to remove or replace the module.
The order of the modules does not matter. The only requirement is that one processor or communication module must always be located on the left at the start of each row – it really couldn’t be simpler.
Easy assignment and readability of the channels is ensured thanks to the clear labeling as well as the status and diagnostic displays. Depending on the module, errors such as broken wire or short circuit are also displayed.