B&R 2BM100.9 High-performance I/O module
Programmable logic controllers (e.g. PLCs, etc.), operating and monitoring devices (e.g.
industrial PCs, Power Panels, mobile panels, etc.), as well as B&R uninterruptible power
supplies, have been designed, developed and manufactured for conventional use in industry.
They were not designed, developed and manufactured for any use involving serious risks or
hazards that without the implementation of exceptionally stringent safety precautions could lead
to death, injury, serious physical damage or loss of any other kind. Such risks and hazards
include in particular the use of these devices to monitor and/or control nuclear reactions in
nuclear power plants, flight control systems, flight safety systems, mass transportation systems,
medical life support systems and weapons systems.
When using both programmable logic controllers and operating and monitoring devices as
control systems in conjunction with a Soft PLC (e.g. B&R Automation Runtime or comparable
products) or a Slot PLC (e.g. B&R LS251 or comparable products), the safety precautions
applying to industrial control systems (e.g. the provision of safety devices such as emergency
stop circuits, etc.) in accordance with applicable national and international regulations must be
observed. The same applies for all other devices connected to the system, e.g. drives.
All tasks such as installation, commissioning and service may only be carried out by qualified
personnel. Qualified personnel are persons familiar with transport, mounting, installation,
commissioning and operation of the product and have the respective qualifications (e.g.
IEC 60364). National accident prevention guidelines must be followed.
The safety guidelines, connection descriptions (rating plate and documentation) and limit values
listed in the technical data must be read carefully before installation and commissioning and
must be observed.
2.2 Intended Use
Electronic devices are generally not fail-safe. In the event of a failure on the programmable
control system, operating or monitoring device or uninterruptible power supply, the user is
responsible for ensuring that other devices that may be connected, such as motors, are made
secure.
2.3 Transport and Storage
Devices must be protected from excessive stress (mechanical load, temperature, humidity,
aggressive atmosphere) during transport and storage.
2.4 Installation
• The installation must take place according to the documentation using suitable
equipment and tools.
• The devices are only allowed to be installed without voltage applied and by qualified
personnel.
• General safety regulations and nationally applicable accident prevention guidelines must
be observed.
• Electrical installation must be carried out according to the relevant guidelines (e.g. line
cross section, fuse, protective ground connection).
| VE4003S2B1 high-precision analog input card |
| VE4050E1C0 KJ4001X1-BE1 8-wide I/O interface carrier module |
| VE4006P2 M series multifunctional module |
| KJ4002X1-BF2 horizontal carrier extension cable assembly |
| VE4035S2B1 2-channel redundant analog output module |
| PLX32-EIP-SIE high-performance communication gateway module |
| 3BHB006716R0277, SYN 5302A-Z,V277 SYCHROTACT 5 series automatic synchronizer |
| LG1093AA24 261A1812P012 high-performance ultraviolet flame sensor |
| TRICONEX 3700A high-performance analog input module |
| TRICONEX 4351B high-performance communication module |
| TRICONEX 3604E highly reliable digital output module |
| TRICONEX 4351A high-performance industrial control module |
| TRICONEX 4329 high-performance network communication module (NCM) |
| VM600 MPC4 200-510-070-113 high-performance mechanical protection module |
| IS420PUAAH1A general purpose input/output module |
| 3BUS208796-501 high-performance industrial automation module |
| 8273-140 high performance speed control module |
| CLS216 216-C20000DF high performance multi-loop temperature controller |
| IS220PSCAH1A serial Modbus communication I/O module |
| G650BFBF2G0HI Multilin 650 Series protective relay module |
| IC660EPM100J power monitoring module |
| 3EST125-975 DCC2382A high-performance drive control unit (DCU) |
| MPC4 200-510-078-115 Meggitt Sensing Systems Mechanical protection card |
2.5 Operation
2.5.1 Protection against Touching Electrical Parts
To operate programmable logic controllers, operating and monitoring devices and uninterruptible
power supplies, certain components must carry dangerous voltage levels of over 42 VDC. A life
threatening electrical shock could occur if you touch these parts. This could result in death,
severe injury or material damage.
Before turning on the programmable logic controller, the operational and monitoring devices or
the uninterruptible power supply, ensure that the housing is properly connected to protective
ground (PE rail). The ground connection must be established even when testing the operating
and monitoring devices or the uninterruptible power supply as well as when operating them for
only a short time.
Before turning the device on, make sure that all voltage carrying parts are securely covered.
During operation, all covers must remain closed.
2.6 Safety Notices
Safety notices are organized as follows:
Safety Guidelines
Description
Danger!
Caution!
Disregarding the safety regulations and guidelines can be life-threatening.
Disregarding the safety regulations and guidelines can result in severe injury or major damage to material.
Warning!
Information:
Disregarding the safety regulations and guidelines can result in injury or damage to material.
Important information for preventing errors