KEBA

CB410-EE1 T150/T155 SWL base station

Selection of the residual-current device (RCD):

● Every charging station must be connected via its own RCD. No other circuits may be connected to this

RCD.

● Residual-current device of at least type A (30 mA triggering current).

If the vehicles to be charged are not known (e.g. semi-public area), measures must be taken for protec

tion where DC residual currents (>6 mA) occur. This can be realized, for example, through device ver

sion KC-P30-xxxxxxx2. the use of an RCD type specifically intended for electric vehicles or with a RCD

type B. The vehicle manufacturer specifications must also be observed.

● If a charging station is protected with a type B residual-current device, every upstream residual-current

device, even those not assigned to the charging station, must either be type B or equipped with a DC

residual-current detection device.

YOKOGAWA 16137-151
YOKOGAWA 16137-153
YOKOGAWA 16137-188
YOKOGAWA 16137-222
YOKOGAWA 16137-223
YOKOGAWA 22.5*17.4*10
YOKOGAWA 2302-32-VLE-2
YOKOGAWA 8596020000
YOKOGAWA 8662560000
YOKOGAWA 8662570000
YOKOGAWA A2EE2A-N
YOKOGAWA AA1543-S00 S1
YOKOGAWA AAI135-H50/K4A00
YOKOGAWA AAI141-H50/K4A00
YOKOGAWA AAI143-H50 S1
YOKOGAWA AAI143-S00 S1
YOKOGAWA AAI543
YOKOGAWA AAI543-H50 S1
YOKOGAWA AAI543-H50/K4A00
YOKOGAWA AAI835-H50/K4A00
YOKOGAWA AAI841-H50/K4A00
YOKOGAWA AAR181-S50 S2
YOKOGAWA AAT141-S00 S2

● The nominal current IN

must be selected to match the circuit breaker and back-up fuse.

Dimensioning of the line circuit breaker:

When dimensioning the line circuit breaker also observe the increased environmental temperatures inside

the switch cabinet. Under certain circumstances, this can make a reduction of the charging current specifica

tion necessary in order to increase the system availability.

● Determine the nominal current according to the type plate specification in coordination with the desired

charging capacity (DIP switch settings for charging current specification) and the power supply line.

AMAT AMAT-DNP-CPCI- 1 DEVICENET PRO PCB CARD SST WOODHEAD

WOODHEAD / MOLEX SST-DN3-PCU-2E PCI DEVICENET v 1.4.0

Woodhead SST-CCS-PCU CC-Link Communications Card CCS-PCU1 U40

Woodhead 3095-002 Super-Safeway Outlet Box 3 Phase Cord Set 20AMP 120/208VAC

SST Woodhead PLX PCI9052 DeviceNet Pro 3U ComactPCI Interface PCB Card Working

SST Woodhead AMAT-DNP-CPCI- 2 DeviceNet 2 Channel Interface PCB Card Working

Woodhead SST PB3-PCU-E V1.7.1 PB3-PCI-e Communication Card

SST WOODHEAD CANADA 490-1655 Printed Circuit Board Card

SST-PFB-SLC Woodhead Profibus Scanner Module

SST Woodhead 5136-DNP-PCM-S T PCMCIA Devicenet Interface

Leave a Reply

Your email address will not be published. Required fields are marked *