FOXBORO P0911QH-A – Generic industrial module
Process Wetted Materials
PROCESS CONNECTION
316L ss or Nickel alloy
SENSOR DIAPHRAGM
316L ss, Nickel alloy, or Co-Ni-C
Pressure Seal Diaphragm Material
Varies with pressure seal selected.
See PSS 2A-1Z11 A.
Reference (Atmospheric Pressure) Side
Materials
IAP10
Not applicable
IGP10 WITH SPAN CODES C AND D
Silicon, Pyrex, RTV, and 316 ss
IGP10 WITH SPAN CODES E AND F
Not applicable
Fill Fluid
Silicone Oil or Inert FC43. as specified.
Dimensions
Refer to “DIMENSIONS – NOMINAL” on page 36
and to Dimensional Print DP 020-447.
Approximate Mass
With Aluminum Housing:1.5 kg (3.3 lb)
With 316 ss Housing: Add 1.1 kg (2.4 lb)
With Pressure Seals: See PSS 2A-1Z11 A
Accessories
IAP10 and IGP10 Transmitters can be provided with
integral connections for both sanitary, and pulp and
paper processes. With these applications, numerous
accessories are offered, including tank spuds, weld
spuds, heat sinks/plugs, calibration adapters, Tri
clamps, and O-rings (or gaskets). Refer to
PSS 2A-1C13 K (Sanitary Processes) and
PSS 2A-1C13 L (Pulp and Paper Processes) for
complete specifications.
1/2 NPT Conduit Connection, Aluminum Housing 1
PG 13.5 Conduit Connection, Aluminum Housing (With Electrical Safety Code D only) 2
1/2 NPT Conduit Connection, 316 ss Housing 3
PG 13.5 Conduit Connection, 316 ss Housing (With Electrical Safety Code D only) 4
M20 Conduit Connection, Both Sides, Aluminum Housing (with Electrical Safety Code D only) 5
M20 Conduit Connection, Both Sides, 316 ss Housing (with Electrical Safety Code D only) 6
Electrical Safety (See Electrical Safety Specifications Section for Description and ApprovalStatus)
Electrical Safety (See Electrical Safety Specifications Section)
ATEX flameproof; II 2 GD, EEx d IIC, Zone 1 (g) (h) D
CSA Certifications: (i)
Division, 1 intrinsically safe, explosionproof, dust-ignitionproof
Zone certified Ex ia IIC, and energy limited Ex nA II
Division 2. Classes I, II, and III
| MOTOROLA | MVME2434 |
| MOTOROLA | MVME2604-4351 |
| MOTOROLA | MVME2604761 |
| MOTOROLA | MVME300 |
| MOTOROLA | MVME3100 |
| MOTOROLA | MVME333-2 |
| MOTOROLA | MVME335 |
| MOTOROLA | MVME374 |
| MOTOROLA | MVME5100 |
| MOTOROLA | MVME51005E-0163 |
| MOTOROLA | MVME5101-0131 |
| MOTOROLA | MVME5110 |
| MOTOROLA | MVME5500 |
CSA zone certified flameproof Ex d IIC. Also all certifications of Code C above. (g) (h) B
FM Approvals: (i)
Division 1. intrinsically safe, explosionproof, dust-ignitionproof
Zone approved AEx ia IIC
Division 2. nonincendive, Classes I, II, and III
F
FM zone approved flameproof AEx d IIC. Also all approvals of Code F above. (g) (h) G
IECEx flameproof, Ex d IIC, Zone 1 (g) (h) V
Optional Selections See descriptions below.
Mounting Bracket Set (j)
Painted Steel Bracket with Plated Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only)-M1
Stainless Steel Bracket with Stainless Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only)-M2
Painted Steel Bracket with Plated Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only)-M3
Stainless Steel Bracket with Stainless Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only)-M4
Painted Steel Bracket with Plated Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only)-M5
Stainless Steel Bracket with Stainless Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only)-M6
Blind (Solid) Cover over Standard LCD Indicator
Blind (Solid) Cover replaces Window Cover-L2
Vent Screw and Block & Bleed Valve
316 ss Vent Screw in Process Connection (Not with Structure Codes 32 or 33. or Pressure Seals)-V1
Block and Bleed Valve, Carbon Steel (Not with Pressure Seals)-V2
Block and Bleed Valve, 316 ss (Not with Pressure Seals)-V3
Block and Bleed Valve, 316 ss w/Monel Trim (Not with Pressure Seals)-V4
Conduit Thread Adapters
Hawke-Type 1/2 NPT Cable Gland for use with Conduit Connection Codes 1 and 3 only (k)-A1
M20 Connector for use with Conduit Connection Codes 1 and 3 only (k)-A3
Electronic Housing Features
External Zero Adjustment-Z1
Custody Transfer Lock and Seal-Z2
External Zero Adjustment and Custody Transfer Lock and Seal-Z3
Custom Factory Configuration
Full Factory Configuration (Requires Configuration Form to be filled out)