YOKOGAWA EB501 ER bus interface slave module
The Yokogawa EB501 is a critical ER Bus Interface Slave Module used within the CENTUM VP and CENTUM CS 3000 Distributed Control Systems (DCS).
It functions as the communication bridge for Remote I/O (ER Bus) nodes, allowing field control units to manage I/O modules over long distances.
1. Introduction
The EB501 is installed in an ER Bus Node Unit (such as the ANR10). Its primary role is to facilitate communication between the Field Control Unit (FCU) and the Remote I/O modules.
It converts the signals from the ER Bus (which typically uses coaxial cabling) into data that the local I/O modules can process.
This allows for a decentralized control architecture where I/O racks can be placed closer to the actual field instruments, reducing wiring costs.
2. Technical Parameter Table
EB501
| Feature | Specification |
| Model Code | EB501 |
| Module Type | ER Bus Interface Slave Module |
| Communication Speed | 10 Mbps |
| Physical Interface | IEEE802.3 10BASE-2 (1 Port) |
| Connector Type | BNC |
| Max. Distance | 185 m (using YCB141 coaxial cable) |
| Current Consumption | 0.7 A (at 5V DC) |
| Operating Temp | -20°C to +70°C (requires 10 min warm-up below 0°C) |
| Redundancy | Supported (Dual-redundant configuration available) |
| Weight | Approx. 0.3 kg |
3. Related Models
The EB501 works as part of a master-slave pair. Related components include:
EB401: The ER Bus Interface Master Module, installed in the Field Control Unit (FCU) side.
ANR10: The ER Bus Node Unit (the rack/nest where the EB501 is housed).
YCB141 / YCB311: Specialized coaxial cables used to connect the EB401 to the EB501.
YCB147 / YCB149: Bus adapter units used for cable transitions or grounding.
4. Product Advantages and Features
Extended Range: Allows I/O nodes to be located up to 185 meters away from the controller, which can be further extended using repeaters.
Environmental Robustness: Features an optional G3 Corrosive Gas Resistance coating and a wide temperature range, making it suitable for harsh industrial environments.
High Reliability: Supports dual-redundant configurations. If one EB501 module or cable fails, the system automatically switches to the standby unit without process interruption.
Easy Diagnostics: Equipped with status LEDs on the front panel to indicate communication health and hardware status.
| ALSTOM | PIB310 3BHB0190 |
| ALSTOM | PIB1201A 3BEC0067 |
| ALSTOM | 43297029 |
| ALSTOM | MAVS01L1AB0751D |
| ALSTOM | MCGG62N1CB0753F |
| ALSTOM | MFAC14K1AA0001A |
| ALSTOM | MVAW11B1AB9007A |
| ALSTOM | MAVS01L1AB0501D |
| ALSTOM | MVAJ27L1FB0784D |
| ALSTOM | MVTU11K1CD0751G |
| ALSTOM | MVAW11B1AB0513A |
5. Application Cases
Large Refineries: Used when I/O points are distributed across multiple remote “satellite” instrument houses far from the central control room.
Water Treatment Plants: Managing pumping stations located in different parts of a large facility using a single central DCS.
Retrofitting Legacy Systems: Often used when migrating from older Yokogawa XL or CENTUM V systems to CENTUM VP, as it supports similar remote wiring topologies.
6. Other Models in the Same Series
EB501-10: Basic type for standard temperature and non-explosion-proof areas.
EB501-50: Enhanced type, often including ISA G3 conformal coating for protection against corrosive atmospheres.
EB501-13: A specific variant typically utilized in newer CENTUM VP R5/R6 configurations.
EB501