Kollmorgen S20330-SRS S200 servo drive
S200 servo drive
Empty heading
The Kollmorgen S200 servo drive is one of the first all-digital industrial drives with a speed loop bandwidth of 800 Hz.
These compact drivers offer simplified tuning and unparalleled system throughput, featuring high-resolution feedback and high-performance current loop bandwidth for smooth movement and rapid response.
This intelligent feedback device with an electronic motor nameplate enables plug-and-play debugging in most applications.
Feature
Supports 120/240 VAC and 20-90 VDC operation, with a rated current ranging from 1.5 amperes RMS to a peak of 48 amperes RMS
24-bit high-resolution feedback
High-performance current loop bandwidth of 3-5 kHz
The intelligent feedback device with an electronic motor nameplate eliminates the need for drive parameter setting and servo circuit calibration, enabling plug-and-play debugging for most applications
The standard configuration includes a torque and speed control base, electronic gears, up to 18-bit analog reference inputs, and encoder equivalent outputs
Provide support for index or SynqNet™ based programmable motion control options
Complies with UL 508C, CE, EN50178. EN61800-C and Semi F47 standards
The independent “Sustain Life” power input enables rapid recovery in an emergency stop state
Advantages
A wide power range allows a single hard disk series to be deployed throughout the entire machine
The compact body size allows for the use of smaller cabinets or installation near the point of use
Optical isolation input/output, positive locking connector, and full fault protection ensure long service life and protection against accidental damage
High-performance system, designed to increase machine throughput
The easy-to-use graphical user interface reduces engineering and support time
Overall cost reduction
Technical data
Model
Rating data drops: 20330. 20630. 20260. 20360
Rated power supply voltage V 20… 90 volts DC 0… 264 VAC
Control logic, supply voltage V 10… 90 volts DC 85… 265 VAC
Rated output current (root mean square value, ± 3%) one 3 6 1.5 3
Peak output current (± 3%) one 9 18 4.5 9
Peak hours: 3 3 3 3 3
Maximum bandwidth of the current loop. Kilohertz 5 5 3 3
Maximum bandwidth of the speed loop. Hertz 800
Update frequency: MHz 1.25
“Size”
DC direct current and optional air conditioning
Height: 152.4 mm, 152.4 mm, 175 mm
Width: 28.7 mm, 48.3 mm, 54.8 mm
The depth without connectors is 101 mm, 101 mm, and 132 mm
The depth of the connecting parts is approximately 130 millimeters to 130 millimeters to 180 millimeters