Honeywell 51304485-100 DI IOP Digital Input 32ch
DI IOP Digital Input 32ch
The Honeywell 51304485-100 IOP and its compatible DI FTA can accommodates 32 contact inputs that share an isolated common return.
The 240 Vac Digital Input (DI) FTA is similar to the 120 Vac Digital Input FTA, except it accommodates a higher operating voltage, a lower sense current,
and the inputs of all 240 Vac DI FTA models are arranged in groups of eight channels, each with a common return for the group.
Digital Input IOP MU-PDIX02
CE-compliant, Non-Conformal Coated
Redundancy not supported
Input Channels: 32
Input Range:
w/24 Vdc FTA: 20-30 Vdc
w/120 Vac FTA: 90-132 Vac rms
w/240 Vac FTA: 180-264 Vac rms
Feature Summary
Hardware
51304485-100
Modular rack structure; components are ordered individually as needed
CPU with Ethernet and isolated RS485 communications
Easy to assemble, modify, and expand
C30 and C30S controllers provide local I/O connections while C50/C70 and C50S/C70S Controllers provide for
remote input/output rack connections over a private Ethernet-linked network
Parallel processing – a microprocessor in each I/O module performs signal processing, to preserve update rates
Power supplies – provide power to CPU rack and Scanner I/O racks
Redundancy
51304485-100
Redundant C75 CPU
Redundancy Switch Module (RSM) – required between redundant CPUs
Redundant Power Supply – provides redundant power to any CPU rack or Scanner2 I/O rack
Power Status Module (PSM) – required when using a second power supply in Scanner2 I/O rack
Communications
All CPUs (except where noted):
Serial Ports:
Legacy
Two serial ports, configurable for RS-232 or galvanically isolated RS-485 communications.
RS232 port can be used for link to PC for 900 Designer configuration tool (up to 50ft/12.7 Meters)
or via modem. Also can be configured for Modbus RTU, master or slave.
RS 485 port used for 2 wire link to legacy operator interface (ELN protocol) or can be configured
for Modbus RTU, master or slave communications (up to 2000 Ft /600 Meters).
New Controllers
Two isolated RS 485 communications ports
USB to RS485 cable must be obtained to support link to PC for 900 Designer configuration tool
Can be configured for Modbus RTU, master or slave communications (up to 2000 Ft /600 Meters)