EMERSON KJ4001X1-BE1 8-Wide I/O Carrier
KJ4001X1-BE1 8-Wide I/O Carrier
Hazardous Atmosphere
3G Ex ec IIC Gc
FM16ATEX0056U
FM21UKEX0017U
CL. I Div. 2 GP. A,B,C,D
CL. I Zone 2 AEx/Ex ec IIC Gc
FM17US0286U
FM17CA0145U
Power Specifications
Local Bus Power
Bussed field Power
12.6 VDC at 8 A
30 VDC at 6.5 A
Environmental Specifications
Ambient
Temperature
Shock
Vibration
Airborne
Contaminants
Relative Humidity -40°C to +70°C
10g ½ Sinewave for 11msec
1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz
ISA-S71.04 –1985 Airborne
Contaminants Class G3
5 to 95% Non-Condensing
Note: Refer to the product label for serial number
and location and date of manufacture.
Warning: This product has specific instructions for
installation, removal and operation in hazardous
areas. Refer to document 12P2046 “DeltaV™
Scalable Process System Zone 2 Installation
Instructions”. Other installation instructions are
available in the “DeltaV™ M-Series Hardware
Installation and Reference” manual.
Removal and Insertion
KJ4001X1-BE1
This unit cannot be removed or inserted with system
power energized. Power must be de-energized
before disconnecting any carriers or LocalBus
Extender cables.
Bussed field power must not be connected to a
supply that generates or contains a source of
potential in excess of 30 VDC.
Field power supplied to this device either at the field
terminal or as bussed field power via the I/O carrier
must be removed before removing or connecting this
device.
A module cover (KJ4001X1-FA1) must be fitted to
any permanently unoccupied location on a carrier.
(Permanently unoccupied implies no I/O card is
intended for that location.)
No combination of I/O carriers and LocalBus
Extenders must exceed a length of 6.5 meters.
Interconnecting cable between enclosures must be
in conduit.
Maintenance and Adjustment
This unit contains no user serviceable parts and
should not be disassembled for any reason.
Calibration is not required