ABB SYSTEM DRIVES PCS6000

SYSTEM DRIVES

PCS6000

3.1. Overview

The following tables indicate all converter service tools required for service work on the

PCS6000 with their ABB order number (SAP number).

Product safety labels

Product safety labels on the equipment alert you to the hazards that can occur when you

work on or operate the equipment.– Always follow the instructions on the labels to avoid the hazard– Keep the labels in a perfectly legible condition

For the location of the labels, see the label placement document for the drive

2.3. Electrical safety

The following electrical safety instructions are based on EN 50110.

2.3.1. General safety instructions

1) Minimize hazards.

2) Before energizing the drive:

• Remove all foreign objects are from the drive

• Fasten all internal and external covers securely

• Close, lock, and/or bolt all doors

• Move the release dial of the door safety switches into the locked position

3) Before working on the drive:

• Turn off, lock out, and tag out the main and auxiliary power supplies to the drive

• De-energize the drive

• Ensure that the safety ground connections are in place

• Ensure that the appropriate personal protective equipment (PPE) is available and

used when required

• Inform the involved personnel about the potential safety hazards

• Wear hearing protection when a drive is running.

4) Before working simultaneously on the drive and on other drive system equipment:

• Observe the relevant safety codes and standards

• Turn off all energy sources for the equipment

• Ensure that all lockout and tagout devices are in place

• Install barriers around and use appropriate covers on the equipment that is still

energized

• Inform the involved personnel about the potential safety hazards