Woodward easYgen-3500XT-P2-LT-RENTAL 8440-2291 Genset Control for
Woodward easYgen-3500XT-P2-LT-RENTAL 8440-2291 Genset Control for
Genset Control for
Complex Paralleling Operation
New Features
✓ Built-In Redundant Ethernet
✓ Power Measurement Class 1
✓ Direct Connect Up to 690 VAC
✓ AnalogManager & Editable Screens
✓ Multi-Interface ToolKit connectivity
✓ Face plate with tactile buttons
✓ Drop-In replacement
Premium genset control
for complex paralleling
applications of up to 32
gensets in
• Prime Power &
Cogeneration (CHP)
• Peak shaving
operation
• Emergency operation
• Import/Export
operation
• Islanded & Utility
parallel operation
• Group controller and LS
6XT support to manage
large fleet of gensets and
circuit breakers
• Run-Up Synchronization
• Built-in active voltage
regulation
• Complete engine,
generator and utility
protection
• Up to 9 communication
ports: 3xEthernet, 3xCAN
(CANOpen and J1939),
RS-485. USB, Interface
expansion card
• Customizable logic, HMI
screens, and alarms
• Dedicated low
temperature display
variants
• UL 61010. UL 6200. CSA,
RoHS 2. and marine
easYgen-3400XT3500XT
(ABS, LR) compliance
Power supply ………………………………………………….12/24 VDC (8 to 40 VDC)
Intrinsic consumption ………………………………. max. 22 W (LT: max.32 W)
Ambient temperature (operation) …………… -20 to 70 °C (LT: -40 to 70 °C)
Ambient temperature (storage) …………………. -30 to 80 °C / -22 to 176 °F
Ambient humidity…………………………………………….. 95%, non-condensing
Voltage (software configurable) …………………………………………….. ( /)
100 VAC Rated (Vrated) …………………………………….. 69/120 VAC
Max. value (Vmax) …………………………………….. 86/150 VAC
and 400 /600 VAC Rated (Vrated)* …………………………………… 400/690 VAC
Max. value (Vmax) …………………………………… 520/897 VAC
Rated surge volt. (Vsurge) ……………………………………………. 6.0 kV
Accuracy …………………………………………………………………………. Class 0.5
Measurable alternator windings . 3p-3w, 3p-4w, 3p-4w OD, 1p-2w, 1p-3w
Setting range ………………. primary …………………………… 50 to 650.000 VAC
Linear measuring range …………………………………………………… 1.25×Vrated
Measuring frequency …………………………………….. 50/60 Hz (30 to 85 Hz)
High Impedance Input; Resistance per path …………………………… 2.5 M
Max. power consumption per path ………………………………………. < 0.15 W
Current (Isolated, software configurable) Rated (Irated) ……… 1A or 5A
Linear measuring range ……………………………………………… Igen = 3.0×Irated
Imains/ground = 1.5×Irated
Setting range ……………………………………………………………… 1 to 32.000 A
Burden ……………………………………………………………………………. < 0.10 VA
Rated short-time overcurrent (1 s) ……………………[1] 50×Irated, [5] 10×Irated
Accuracy ………………………………………………………………………… Class 0.5
Power ……………………………………………………………………………………………
Setting range ……………………………………………….. 0.5 to 99.999.9 kW/kvar
Accuracy …………………………………………………………………………. Class 1.0
Discrete inputs …………………………………………………………………… isolated
Input range ……………………………………………………12/24 VDC (8 to 40 VDC)
Input resistance …………………………………………………… approx. 20 kOhms
Transistor outputs (P2 only) ………………………………………………… isolated
Rated switching voltage ………………………………………………… max. 24 VDC
Maximum switching voltage …………………………………………………… 40 VDC
Maximum switching current ……………………………………………. 300 mA DC
Isolation Test voltage (<1s) ………………………………………………….. 500 VAC
Isolation voltage (continuously) …………………………………………. 100 VAC/DC
Relay outputs ……………………………………………………………………… isolated
Contact material ………………………………………………………………….. AgCdO
Load (GP) …………………………………………………………… 2.00 AAC@250 VAC
2.00 ADC@24 VDC / 0.36 ADC@125 VDC / 0.18 ADC@250 VDC
Analog inputs (isolated) …………………………………………………freely scalable
Type 1 ………………………………………. 0 to 1 V / 0 to 2000 Ohms /