Woodward easYgen-400 Manual: 37884. 37890 8440-2250
Autostart Controls
easYgen-400 Manual: 37884. 37890
8440-2250
easYgen-600 Manual: 37698. 37786
8440-2252
easYgen-800 Manual: 37691. 37692
8440-2254
Copyright And Disclaimer
Disclaimer
All information and instructions in this manual have been provided under due
consideration of applicable guidelines and regulations, the current and known state of the
art, as well as our many years of in-house experience. Woodward assumes no liability for
any damages due to:
•Failure to comply with the instructions in this manual •
• Improper use / misuse •
•Willful operation by non-authorized persons •
•Unauthorized conversions or non-approved technical modifications •
•Use of non-approved spare parts •
The originator is solely liable for the full extent for damages caused by such conduct. The
obligations agreed-upon in the delivery contract, the general terms and conditions, the
manufacturer’s delivery conditions, and the statutory regulations valid at the time the
contract was concluded, apply
Copyright
This manual is protected by copyright. No part of this manual may be reproduced in any
form or incorporated into any information retrieval system without written permission of
Woodward GmbH.
Delivery of this manual to third parties, duplication in any form – including excerpts – as
well as exploitation and/or communication of the content, are not permitted without a
written declaration of release by Woodward GmbH.
Actions to the contrary will entitle us to claim compensation for damages. We expressly
reserve the right to raise any further accessory claims
1.3
Service And Warranty
Opening the device will nullify any warranty
Any such unauthorized modifications
• constitute “misuse” and/or “negligence” as per the product warranty
• thereby exclude warranty coverage for any resulting damage, and
• invalidate product certifications or listings.
Our Customer Service is available for technical information. Please see page 2 for contact
details.
In addition, our employees are interested in any new information and experiences that
arise from usage and could be valuable for improving our products.
1.4
1.4.1
Safety
Intended Use
The easYgen unit has been designed and constructed solely for the intended use
described in this Operation Manual and – with even more details – in the Technical
Manual.
• Intended use requires operation of the control unit within the range outlined in the
written specifications
Steps to be taken for commissioning are outlined in the Technical Manual. •
• Intended use includes compliance with all instructions and safety notes presented in •
this manual.
•Any use which exceeds or differs from the intended use shall be considered improper •
use.
•No claims for any kind for damage will be considered if such claims result from •
improper use
This manual specifies the personnel qualifications required for the different areas of work,
listed below:
•Well trained for electrical installations. •
•Aware of the local safety regulations. •
•Experienced in working with electronic measuring and control devices. •
•Allowed to manage the controlled (engine/generator) system. •
The workforce must only consist of persons who can be expected to carry out their work
reliably. Persons with impaired reactions due to, for example, the consumption of drugs,
alcohol, or medication are prohibited.
When selecting personnel, the age-related and occupation-related regulations governing
the operating location must be observed
System Overview
General notes
The easYgen is a stand-alone genset controller with measuring, monitoring, and breaker
control functionality. It comes with an easily mountable plastic housing covering a
thoroughly tested electronic-electrical system.
Display and buttons of the HMI offer access to states and values, as well as access to the
application. Password protection enables the assignment of multiple operation access
levels. Remote access, monitoring, visualization, and configuration are possible via
integrated interfaces. Communication between easYgens using PLC control or as a
network member offers an enhanced system management range; additionally supported
by easy to implement accessories
HMI Status Screens
HMI displays the following status screens:
• Status (home)
• Generator
• Load
• Engine 1
• Engine 2
• Status
• Alarm
• home screen etc.
ToolKit-SC Status Screens
General notes
ToolKit-SC lets you access status information via the following screens