EPRO PR6423010-010-CN 8mm Eddy Current Sensor
8mm Eddy Current Sensor
Non-contact sensor designed for critical turbomachinery applications such as
steam, gas and hydro turbines, compressors, gearboxes, pumps and fans to
measure radial and axial shaft dynamic displacement; position, eccentricity
and speed
Performance
Linear Measurement Range
Initial Air Gap
Incremental Scale Factor (ISF)
Deviation from best fit straight line
(DSL)
Measuring Target
2 mm (80 mils)
0.5 mm (20 mils)
ISO: 8 V/mm (203.2 mV/mil) ± 5%
@ temperature range 0 to 45°C
(+32 to +113°F)
± 0.025 mm (± 1 mil)
@ temperature range 0 to 45°C
(+32 to +113°F)
Minimum Shaft Diameter
Target Material (Ferromagnetic Steel)
Environmental, General
Protection Class
Operating Temperature Range
Material
Weight (Sensor with 1m Cable)
25 mm (0.79”)
42CrMo4 (AISI/SAE 4140) Standard
Other (On Request)
IP66. IEC 60529
Sensor incl. 1m Cable: -35 to +180°C (-31 to 356°F)
Cable & Connector: -35 to +150°C (-31 to 302°F)
Sensor Tip (PEEK Polyether Ether
Ketone), Case (Stainless Steel)
Cable (PTFE Polytetrafluoroethylene),
Connector (Brass, nickel-plated)
Approx. 100 grams (3.53 oz)
PR6423010-010-CN
A. Case thread, M10x1 or 3/8-24UNF
B. SW 11 mm for M10 threads, SW 7/9-16 in for 3/8-24UNF threads
C. Standard cable diameter 2.8 mm (0.110 in), minimum bending radius
25 mm (0.984 in)
D. Armored cable diameter 6 mm (0.236 in), minimum bending radius
35 mm (1.378 in)
E. Optional Adapter Plug after 1m cable from Sensor
F. Cable Length (Tolerances 0… +10%)
G. Lemo connector (male), 11.0 mm (0.433 in) diameter or open cable end
A. Case thread, M10x1 or 3/8-24UNF
B. SW 11 mm for M10 threads, SW 7/16 in for 3/8-24UNF threads
C. Standard cable diameter 2.8 mm (0.110 in), minimum bending radius
25 mm (0.984 in)
D. Armored cable diameter 6 mm (0.236 in), minimum bending radius
35 mm (1.378 in)
E. Optional Adapter Plug after 1m cable from Sensor
F. Cable Length (Tolerances 0… +10%)
G. Lemo connector (male), 11.0 mm (0.433 in) diameter or open cable end
PR6423010-010-CN